Sullair Two-Stage

Two-Stage Standard Pressure Models

• Multi-Stage Air-Fluid Separation

  • Dual nested Optimizer™ separator elements, reduce fluid carryover to a maximum of 1 ppm

  • Reduced carryover lowers make-up fluid costs

  • Pleated Optimizer elements lower initial pressure drop for greater efficiency and extends element life

  • Easy to change with built-in lid lifting device

• Fiberglass Fluid Filter

  • Aircraft-quality media provides better filtration

  • Up to 20% more efficient than conventional paper elements

  • Lengthens life of the compressor

• Optimalair® Heavy-Duty Air Intake Filter

  • Includes remote air intake connection

  • Provides finest inlet filtration in the industry (99.95%+ overall efficiency/0.4 micron)

  • Keeps fluid clean and extends life of other internal components

  • Reduces pressure drop throughout the operating life, resulting in energy savings

• Two-Stage Compressor Air End

  • Delivers more air

  • Reduces power consumption

  • Extends air end bearing life

• Enhanced Serviceability for Air-Cooled Oil Cooler and Aftercoolers

  • Easy to remove panels provide access for cleaning coolers

• Motor Coupled to Air End Through Non-Lubricated, Flexible Coupling

  • Allows use of standard NEMA frame motor

  • Simplifies installation and start-up

• Variable Capacity Control System Featuring Spiral Valve Technology

  • Lowers part-load operating costs

  • Reduces cycling duty on package

  • Maintains consistent plant pressure

  • Simple control

  • Reduces bearing load

• Sullair Supervisor™ Controller

  • Computer-compatible microprocessor controller has simple graphic illustration of monitored functions and an easy-to-read keypad

  • Constant readout of pressure and temperature

  • On-demand readout of all operating and maintenance conditions

  • Monitors key functions and safety shutdowns

  • Power failure auto restart

  • Dual control, provides automatic start-stop operation

  • Lead-lag and sequencing with multiple compressors

  • Service and preventive maintenance schedule

  • Hours are recorded for “Run,” “Loaded” and “Consumable Parts”

  • Fault history with sensor readings

  • “Help” key provides built-in troubleshooting

• Easy Maintenance

  • Access to all critical components even with a sound enclosure installed

• Time Proven End-to-End Design

  • Reduces pressure drop through stages

  • Easy serviceability

• NEMA 4

  • Wye-Delta starter for softer start

• Bearing Fluid Reservoirs

  • Ensure that fluid is available at start-up

  • Extend air end life

• Genuine Sullube® Factory Fill

  • A 10,000-hour extended-life synthetic fluid powered by Dow technology, Sullube has been used in more than 50,000 compressors worldwide

• Sullair 10-Year Diamond Warranty*

Two-Stage Extreme Pressure Models

• Dependable, high-performance two-stage air end for maximum power savings

• 460v motor coupled to air end via non-lubricated, flexible coupling

  • Allows use of Standard NEMA frame motor

  • Flange-mounted for positive alignment

• Sullair Supervisor Controller

  • Easy pressure adjustment

  • Capacity modulation range 100 to 40%

• Heavy-duty inlet air filter

  • Two-stage, dry type

    • Inside safety element

    • Differential pressure indicator

• Air-fluid separation

  • ASME psi rated tank

    • ASME pressure relief valve

  • Pleated air-fluid separator element for lower initial pressure drop

• Cooling

  • Air-cooled units use mounted and piped aftercooler with quiet fan

  • Water-cooled units feature an air-in-shell, water-in-tube aftercooler design

  • LS-20TS are equipped with Remote Coolers

*Maintaining the Sullair 10-Year Diamond Warranty requires using Genuine Sullair parts and Sullube, as well as the oil sampling program.

Two-Stage Standard Pressure Models

• PristineFG™

  • Food Grade designed specifically for compressors used in food, beverage and pharmaceutical applications and meets FDA and USDA H-1 requirements

• Variable Speed Drive (VSD)

Two-Stage Extreme Pressure Models

• Magnetic starter

• Solid state starter

• Sound attenuating enclosure with removable panels

• 575v

Two-Stage Standard Pressure Models

60 Hz

• TS-20—150 to 250 hp (112 to 186 kW), 616 to 1200 cfm (17.4 to 33.9 m3/min), 100 to 175 psi (6.8 to 12 bar)

• TS-32—200 to 350 hp (149 to 261 kW), 1100 to 1875 cfm (31.1 to 53.1 m3/min), 100 to 175 psi (6.8 to 12 bar)

• TS-32S—400 to 600 hp (298 to 447 kW), 1681 to 3000 cfm (47.6 to 84.9 m3/min), 100 to 150 psi (6.8 to 10.3 bar)

• V-320TS—200 to 450 hp (149 to 336 kW) Variable Speed Drive (VSD), 945 to 2310 cfm (26.7 to 65.4 m3/min), 100 to 150 psi (6.8 to 10.3 bar)

50 Hz

• TS-20—150 to 250 hp (112 to 186 kW), 590 to 990 cfm (16.7 to 28.0 m3/min), 100 to 175 psi (6.8 to 12 bar)

• TS-32—200 to 350 hp (149 to 261 kW), 1021 to 1845 cfm (28.9 to 52.3 m3/min), 100 to 175 psi (6.8 to 12 bar)

• TS-32S—400 to 600 hp (298 to 447 kW), 1942 to 2900 cfm (55.0 to 82.1 m3/min), 100 to 150 psi (6.8 to 10.3 bar)

Two-Stage Standard Pressure Models

60 Hz

• LS-20T—200 to 350 hp , 500 to 750 cfm, 225 to 500 psi

• LS-20TS—300 to 500 hp , 800 to 1350 cfm, 225 to 350 psi